Filled Pressure Gauges
SOS!! Find gauge pressure in the water?! and another one:find velocity?
What gauge pressure in the water mains is necessary if a firehose is to spray water to a height of 16 m?
P=______________Pa?
(hint is: The diameter of the mains is not given so you should assume its cross-section area is large.)
2) How fast does water flow from a hole at the bottom of a very wide, 5.2 m deep storage tank filled with water? Ignore viscosity.
v = ___________m/s
could anyone please show me the above two questiobs step by step?
Thanks very much! =D
v=sqrt[2 g h]
v=sqrt[2x9.8m/s/s x 5.2m] = 10.1m/s
Pressure Gauge 1/4NPT 2-1/2" Face 5000 PSI BRAND NEW Panel Mount Glycerin Filled, 0-30 LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , Pressure Gauge 2 1/2" Liquid Filled 0-100 psi, 4" Oil Filled Pressure Gauge - SS/Br 3/8" Lower Mount 0-500psi, Pressure Gauge Liquid Filled 100# 2D 1/4LM, Oil Filled Pressure Gauge 2-1/2", SS/Br, 1/4" Back Mount, 0-30PSI, pkg of 2, 2-1/2" Oil Filled Pressure Gauge - All SS 1/4" Lower Mount 0-60psi, Pressure Gauge, Filled, 3 1/2 In, 5000 Psi , Liquid filled 200 psi air pressure gauge with 2.5" face, 0-3000 LIQUID FILLED PRESSURE GAUGE, AIR, WATER ,HYD., 1 1/2" Liquid Filled Pressure Gauge 1/8"NPT Back Connection, 2" Liquid Filled Pressure Gauge 1/4" NPT Back Connection 0-300 PSI / BAR, 0-60 LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , 5000# LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , 2-1/2" Oil Filled Pressure Gauge - All SS 1/4" Lower Mount 0-300psi, 2-1/2" Oil Filled Pressure Gauge - All SS 1/4" Lower Mount 0-1000psi, Liquid filled 2.5" 200 psi air pressure gauge lower mnt, 0-200 LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , 0-100 LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , 0-300 LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , 2-1/2" Oil Filled Pressure Gauge - All SS 1/4" Lower Mount 0-600psi, 1.5 Liquid Filled Pressure Gauge 1/4NPT Bottom 0~100psi, Oil Filled Pressure Gauge 2-1/2", SS/Br, 1/4" Back Mount, 0-3000PSI, pkg of 2, 0-160 LIQUID FILLED PRESSURE GAUGE AIR WATER HYDRAULIC , Liquid filled 2.5" 300 psi air pressure gauge lower mnt, Liquid filled 2.5" 100 psi air pressure gauge lower mnt, 2-1/2" Oil Filled Pressure Gauge - SS/Br, 1/4" Lower Mount, 0-100psi pkg of 2, Oil Filled Pressure Gauge 2-1/2", SS/Br, 1/4" Lower Mount, 0-5,000PSI, pkg of 3, Oil Filled Pressure Gauge 2-1/2", SS/Br, 1/4" Lower Mount -30HG/0PSI, pkg of 3, Oil Filled Pressure Gauge 2-1/2", SS/Br, 1/4" Lower Mount -30HG/15PSI, pkg of 3, Oil Filled Pressure Gauge 2-1/2", SS/Br, 1/4" Lower Mount, -30/60PSI, pkg of 3, Liquid Filled Pressure Gauge 400 PSI NEW, LHA Liquid Filled 0/3000 Pressure Gauge , WIKA 9310800 3000 PSI 1/4" OIL FILLED PRESSURE GAUGE, Ashcroft Duralife Pressure Gauge 0 - 300psi Liquid Filled, Liquid filled 160 psi air pressure gauge with 2.5" face, Liquid filled 100 psi air pressure gauge with 2.5" face, Liquid filled 300 psi air pressure gauge with 2.5" face, 2 1/2" U-Clamp Liquid Filled Pressure Gauge, 0-1000 LIQUID FILLED PRESSURE GAUGE AIR ,WATER ,HYD.,
The Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. Easy carry handle, 8" diameter, 27.5" height, 1800 psi, CGA-320 valve...
|
|
100 PSI Water Pressure Test Gauge, Measures From 0 To 100 PSI, Attaches To Outside Hose Bibb Or End Of Garden Hose.
|
|
GAUGEL100 0-100# LIQUID FILLED PRESSURE GAUGE
|
|
The Accutire Digital Tire Gauge lets you take accurate readings of tire pressure, even at night, with the backlit display. Features a built-in LED flashlight. Max. PSI: 99, LED Light: Yes
|
|
Power Tank Heavy Duty Tire Inflator features an easy to read 2.5 inch diameter liquid filled dial gauge with rubber shock boot gauge protection. The advantages to a liquid filled gauge are longer life, shock resistance, and higher accuracy...
|
|
Dual head chuck with full swivel. Magnifying lens. 2 lb. graduations from 10 lbs. to 120 lbs. Both gauge and valve cartridges are replaceable. 15in. hose, 3/8in.-24 thread. U.S.A. Max. PSI: 120, Air Inlet Size (in...
|
|
FUEL PRESS GAUGE 0-15 PSI
|
|
The Carex Inflatable Rubber Cushion is durable, and made of heavy gauge rubber all while conforming to the body for comfort. It can be cleaned with a damp cloth and is easy to inflate and deflate.
|
|
Genuine Innovations Ultraflate CO2 Inflation Devices works with all Genuine Innovations CO2 refill cartridges (except 45 gram). Easy to use with built in safety feature and trigger inflation.
|
|
Description This Scuba Yoke Fill Station device allows a person to fill high pressure nitrogen/compressed air tanks from a scuba tank. It has a female quck disconnect, bleed and tension knobs, and the seal ring...
|
|
Shrink label is the new age packaging material used by big brands like Nestle , CocaCola, Pepsi, Tropicana and many other brands for various products from drinks to dairy products , snacks , candy and condiments to soaps.
Shrink labels are made of film material that shrinks when heat is applied and they are non-adhesive. These shrink label come in mainly PVC, PETG, and OPS Shrink labels. These labels are cost effective and environmentally safe. Most of the retailer and manufacturer are now moving to this new age packaging method.
As the market is increasing for this kind of packaging the machine that is used to pack the product with these shrink labels is called the Shrink label applicator. This Shrink Label Applicator is a compact shrink band applicator with small heat shrink tunnel which can shrink the PCV bands on the bottles of different shapes and sizes. Since it is a compact machine it can be easily installed. It reduces manual labor reducing the packaging cost for the manufacturer.
The shrink label applicator is a basic robot that automatically applies pressure sensitive labels to all kind of products. It provides a complete solution for packing with shrink labels. It packs food, pharmaceutical, cosmetic, bottles, dairy items etc. The shrink label applicator is used for applying Shrinkable sleeve label or neckbands on most food package like bottles, yogurt cup, margarine bowls and pharmaceutical product like eye drop container.
The Shrink label applicator is also available in high speed. They can apply labels to more than 300 containers per minute. The running film which is as thin as 35 gauges (microns) can also be applied with high speed and in turn reducing the overall packaging cost for the manufacturer.
As packaging is the last and final step in the production process, once the container is filled and capped it progressed to the labeling station where the shrink label applicator cuts and applies two labels at a time. The cutting of label is such that there is no wastage at all. After the label is cut the container is pushed into the application zone. The container moves to the steam tunnel which heats the label and gets conforms to the container molding in the shape of the container.
The Shrink labels are a very simple cost effective and fast process of packing. The Shrink labels and shrink label applicators have come as an answer to packaging problems. It's an answer to the packaging which was an environment hazard too.

Tags: filled pressure gauges, instrumentation, offshore, reference
You can follow any responses to this entry through the RSS 2.0 feed.
Both comments and pings are currently closed.